Onkyo 7.2 Channel THX Certified Network AV Receiver - TXNR6100
$ 1,199 00
OR $ 199 83/mo
+ taxes/fees With 6 month financing |
We now offer financing powered by Apply Now
Rigorously tested to receive the coveted THX Select Certification, the Onkyo TX-NR6100 7.2-Channel AV Receiver delivers precision sound and images.
With an emphasis on an enhanced gaming experience, own your opponents with HDMI 2.1 enhancements for gamers: 4K/120Hz HDR pass-through enables ultra-fast motion -VRR (Variable Refresh Rate) eliminates lag, stutter, and frame-tearing for fluid gameplay. – ALLM (Auto Low Latency Mode) optimizes latency from source to screen – QFT (Quick Frame Transport) limits lag for a smoother experience.
Setting the bar for reference sound while bringing 8K video to your compatible display over HDMI® 2.1, you can enjoy Dolby Atmos® and DTS: X® soundtracks through your height-enabled surround system or use upmixing and virtualization solutions from DTS® and Dolby® to create a 3D sound-field from any layout.
Featuring three HDMI outputs and 100 watts of power per channel, the TX-NR6100 AV receiver delivers uncompressed HDMI 2.1 8K 60Hz and 4K/120Hz with HDR over 40 gbps, increasing the bandwidth over its predecessors. This SMART AV Receiver™ delivers an unparalleled movie, music, and gaming experience to your living room.
HDMI® 2.1 WITH 8K
HDMI® 2.1 is the most recent update of the HDMI® spec and supports eARC, a range of higher video resolutions and refresh rates including 8K60 and 4K120, and Dynamic HDR formats. 8K delivers a super-immersive viewing experience with 2x the horizontal and vertical resolution of 4K, and 4 times as many pixels; and combined with 60Hz refresh rate enables smooth and sharp viewing of content with high-speed action. HDMI 2.1 with 8K and eARC ensures your system is ready for the clearest and cleanest picture available both now and down the road.
Amplifier | |
---|---|
Power output (All channels) | 210 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC) |
Dynamic power | 240 W (3 ohms, Front) 210 W (4 ohms, Front) 120 W (8 ohms, Front) |
THD+N (Total Harmonic Distortion + Noise) | 0.08% (20 Hz–20 kHz, half power) |
Input sensitivity and impedance | 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM) |
Rated RCA output level and impedance | 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out) |
Frequency response | 10 Hz–100 kHz/+1 dB, -3 dB (Direct/Pure Audio) |
Tone control | ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) |
Signal-to-noise ratio | 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A) |
Speaker impedance | 4–16 ohms |
Tuner | |
FM | 87.5 MHz–107.9 MHz |
AM | 530 kHz–1,710 kHz |
FM/AM preset memory | 40 stations |
General | |
Power supply | AC 120 V~, 60 Hz |
Power consumption (operating) | 635 W |
Power consumption (idle) | 65 W |
Power consumption (standby) | 0.1 W |
Dimensions (W x H x D) | 17 1/8˝ x 6 13/16˝ x 14 15/16˝ (435 x 173.5 x 379.5 mm) |
Weight | 9.8 kg |
UPC | |
UPC | 889951003489 |
Carton | |
Dimensions (W x H x D) | 21˝ x 10 7/16˝ x 18 7/16˝ (534 x 265 x 468 mm) |
Weight | 12.5191 kg |
ACCESSORIES INCLUDED | |
Included | Power Cord, Indoor FM Antenna, AM Loop Antenna, Speaker Setup Microphone, Quick Start Guide, Remote Control, Two AAA Batteries |
Location | Stock |
---|---|
Brampton (Trinity Commons) | Yes |
Kitchener | Yes |
Mississauga | Yes |
Newmarket | Yes |
Scarborough | Yes |
Toronto Leaside | Yes |
Whitby | Yes |
Woodbridge | Yes |